G-210H_CNC lathe with inclined rail_GUANGZHOU MACHINE TOOL WORKS CO.,LTD
	
      

	
	
      
	

      


      






      

	

	
      

		
      
			

			
			
      


				
      

					
      

						


						
      

							
      G-210H							
      

						
							
      

								
      Description: 
      

								
      

								The G-250,G-300,G-210H are especially suitable for turning,drilling and other processes in rough and fine procedures of meduim and medium-small shafts and disks parts.The whole equipment adopts entire enclosure protection and features stable and solid,with an extensive use in the production of parts for various industrial products.In addition,it is available to be configured with high-speed robots on demands,realizing unmanned flexible production.
								
      
								
      

							
      
							
      
							
							
      
							
								
      Features:
      
							
								
      
							
								
      1、spindle:The spindle is structured with high-power,large-torque,and high-precision sleeve,characterized by increased reduction ratio and good low-speed performance.
      2、Turret:The servo turret is configured with the servo motor indexing,crankset positioning and hydraulic clamping mechanisms,or a traditional servo turret is used.
      3、X/Z-axis:It is driven by a high-grade imported precision ball screw with the roller guide widened and span increased,thereby with standing heavy cutting.
      4、Tailstock:Adopt a tailstock of high rigidity and mountain-typed flat guide rail for easy movement.

      							
								
      
								
      
							
							
      
							

						
      

						
      

					
      

					
      

						
      Specifications:
      

						
      

							

      Item
      unit
      Specification
      Remark
       
      Working range
      Maximum spinning diameter
      mm
      Φ580

      Maximum turning diameter of disk parts
      mm
      Φ300

      Maximum machining length
      mm
      300

      Saddle inclination against the level
      °
      30°

       
       
      Spindle
      Spindle motor
      kw
      11/15（continuous/30minutes）

      Spindle end

      A2-6

      Diameter of spindle through-hole
      mm
      Φ66

      Maximum rotational speed of spindle
      r/min
      4000

      Spindle precision
      mm
        Radial clearance≤0.008，                                                           axial clearance≤0.005

       
       
       
       
      Coordinate axis
      Maximum travel along the horizontal direction(X-axis)
      mm
      165

      Maximum travel along the vertical direction(Z-axis)
      mm
      350

      X-axis serve unit

      15Nm,3000r/min

      Z-axis serve unit

      15Nm,3000r/min

      Maximum feed rate along the X-axis
      m/min
      30

      Maximum feed rate along the Z-axis
      m/min
      30

      Positioning precision
      mm
      X±0.006,Z±0.011,

      Repeated Positioning precision
      mm
      X±0.003,Z±0.003,

       
       
      Tool post
      Type of tool post

       servo tool post

      Number of tools

      8-station

      Specification of outer diameter and end face tool holder
      mm
      25X25

      Diameter of inner hole tool seat
      mm
      Φ32

      Clamping device
      chuck

      8"three-jaw medium hollow oil pressure chuck

      Hydraulic cylinder

      Medium hollow rotary cylinder

      Hydraulic tailstock
      Maximum travel of center sleeve
      mm
      80

      Maximum travel of tailstock
      mm
      260

       Taper of the center sleeve

      MT4

      Hydraulic system
      Oil tank capacity
      L
      60

      Hydraulic pump pressure
      kg
      35

      Chip removal
      Auto chip conveyor

      Chain plate type chip removal conveyor and chip collecting truck

       
           Others
      Total capacity of lathe power supply
      kw
      22

      Boundary dimension：length x width x height
       mm
      2130x1580x1650

      Net weight of lathe
      kg
      2500